converting to disc... proportioning valve? manual brakes? Chevelle Tech

Adjustable Proportioning Valve Instructions. Wilwood Adjustable Proportioning Valve 1) The proportioning valve in the Prop Block will be used to adjust the rear brake pressure of the vehicle.The objective is to balance the pressure of the rear brakes to the front so that under hard braking, the rear brakes do not lock up before the fronts View All Coyote Swap; Brakes & Hydroboost; Drivetrain;

Be sure to test the brakes a few times before making any adjustments. Adjust the proportioning valve to full increase as marked on knob

Adjustable Proportioning Valve opinions Chevelle Tech

An adjustable proportining valve should never be installed between the master cylider and distribution block as the block will sence unequal pressure and block fluid flow. The proportioning valve can also be used effectively with dual master cylinder systems. For safety, start with the proportioning valve set with maximum reduction setting, knob fully screwed out, and work from.

converting to disc... proportioning valve? manual brakes? Chevelle Tech. 2) Start with the valve in the full increase position by turning the knob all the way. 2.turn valve to full decrease, counting the number of turns 3.Increase the valve half the number of turns counted in step 2

Proportioning Valve Plumbing Diagram. See Figure 1, Figure 2, and Figure 3 for reference The new Proportioning Valve is designed to mount on the same side as the ports on the ReMaster Master Cylinder